Distinguishing Features
- For membranes rated from 10 to 120 GDP
- Required no electricity
- pump powered by energy from brine normally lost to the drain
- Improves water quality
- Effective for inlet water pressure as low as 30 psi
- Fills product tank up to 5 times faster under normal use
- Saves 400% of waste water vs. conventional units
- Allows smaller capacity membranes
- Increases membrane life
- Prevents "membrane TDS creep"
- Allows greater product tank pressure (90% of feed pressure)
- Compact size
Technical Specifications
PUMP DESIGN: "Positive displacement, reciprocating, single action diaphragm, hydraulicall driven.
WEIGHT: 1 lb.
WETTED MATERIALS-PERMEATE SIDE: NSF listed and FDA approved thermoplastic, EPDM.
NON-WETTED MATERIALS: Stainless Steel, Polypropylene.
MOUNTING: Always mount pump with outlet ports up. Mounting clip (ABS) with (2) #10 S.S. screws available.
FITTINGS: Optional Jaco or John Guest straight or elbow.